|Stainless Steel||Tradename||UNS no.||Werkstoff No.||Density (g/cm3)|
DM Special Steel Ltd is a leading manufacturer and supplier of stainless steel 321 (1.4541) and 321H (1.4878) grade buttweld pipe fittings and flanges. DM Special Steel Ltd offers a complete range of stainless steel 321/321H pipe fittings such as SS 321 reducer, SS 321 elbow, SS 321 tee, SS 321 cross, SS 321 end caps, SS 321 stub ends and SS 321 pipe bends. Stainless steel 321 and 321H pipe fittings are manufactured in compliance with ASTM A-403 and ANSI B16.9 / 16.28/ MSS SP-43 / Welding Bevel Standards ANSI B 16.25.
We specialise in the manufacture and supply of SS 321 pipe bends in both standard and non standard sizes, with bending radius of 1D to 10D or any other custom bending radius. We offer ex-stock delivery of various standard size and type SS 321 pipe fittings, SS 321 flanges and SS 321 pipe bends. Our specialty is to manufacture and supply large size fabricated 100% radiography tested SS 321 elbows, SS 321 reducers, SS 321 tees and SS 321 large diameter fabricated pipes.
Grade 321 is a common austenitic 18/8 stainless steel alloy, with the addition of titanium. Type 321 stainless steel is similar to Type 304 stainless steel but with a titanium addition of at least five times the carbon content. The major difference between them is that the titanium addition reduces carbide precipitation during welding.
Stainless steel 321 grade is widely used in high temperature environments of up to 900° C. 321 stainless steel has good welding and forming capabilities and is widely used in operating temperature environments in excess of 500° C. Stainless steel 321H, commonly referred as UNS S32109, is the higher carbon version of the 321 grade, to provide higher temperature strength.
DM Special Steel Ltd also stocks and supplies a complete range of SS 321 pipes to complement our existing production range of SS 321 buttweld fittings and SS 321 flanges. Stainless steel 321 seamless pipes can be supplied in cut to length sizes and also machined or fabricated to meet your custom piping requirements.
|Specification||ASTM A182 / A403 & ASME SA182 / SA403|
|Type||Seamless / Welded / Fabricated|
|Bending Radius||R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom|
|Range||½”NB to 48”NB in Sch 10s, 40s, 80s, 160s, XXS.|
|Dimensions||ANSI/ASME B16.9, B16.28, MSS-SP-43.|
|SS 321 Elbows – Long Radius||SS 321 Stub Ends||
Sizes 1/2″ – 48″
|SS 321Elbows – Short Radius||SS 321 Crosses|
|SS 321 Reducing Elbows||SS 321 Reducing Crosses|
|SS 321 45° Elbows||SS 321 180° LR Return Bends|
|SS 321 Tees||SS 321 180° SR Return Bends|
|SS 321 Fabricated Tees||SS 321 Pipe Bends / Piggable Bends|
|SS 321 Reducers||SS 321 Couplings|
|SS 321 Concentric Reducers||SS 321 Pipe Nipples|
|SS 321 Eccentric Reducers||SS 321 Forged/Plate Cut Rings|
|SS 321 3D Elbow||SS 321 End Caps|
|SS 321 5D Elbow||SS 321 Forged / Plate Circles|
|SS 321 90° Elbows||SS 321 Couplings||
Sizes 1/8″ – 4″
Pressure Ratings –
|SS 321 45° Elbows||SS 321 Reducers|
|SS 321 Street Elbows||SS 321 Inserts|
|SS 321 Tees||SS 321 Caps|
|SS 321 Crosses||SS 321 Unions|
|Specification||ASTM A182 / A240 & ASME SA182 / SA240|
|Standard||ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.|
|Size||1/8” to 36″|
|Dimensions||ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.|
|Class / Pressure||150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.|
|SS 321 Slip-On Flanges||SS 321 Threaded Flanges||
1/8″ – 36″
Raised Face or Flat Face
|SS 321 Weld Neck Flanges||SS 321 Socket Weld Flanges|
|SS 321 Blind Flanges||SS 321 Reducing Flanges|
|SS 321 Lap Joint Flanges||SS 321 Plate Flanges|
Products are packaged to ensure that there is no damage during transit. In case of exports, standard export packaging is done in wooden cases. All fittings and flanges are marked with Grade, Lot No, Size, Degree and our trade mark. On special requests we can also, make custom marking on our products.
At DM Special Steel Ltd, all fittings and flanges are subject to strict inspection at each stage of the production process, from starting material purchasing to product dispatch. They are visually examined for conformity to ASTM, ASME, MSS, DIN, EN, and JIS codes and standards. Upon request, official certified Inspection Agencies can be called in to witness the material reports, dimensions and quality conformity of products.
Test Certificates: Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report